Welcome to ZheJiang Mingch Electrical Co.,Ltd.

MC-15 SWITHC POWER SUPPLY Home / Switch Power Supply / MC-15 SWITHC POWER SUPPLY

MC-15 SWITHC POWER SUPPLY

MAIN SPECIFICATION

atures 1.Low price and high reliablity.
2.105 degrees output capacitor.
3.AC input power suitable for the world.
4.High efficiency and low operation temperature.
5.Soft-start current can reduce the AC input impact effecticly.
6.With short-circuit and overload protection.
7.100% full-load burn-in test.
8.Installed with EMI filter,minimum wave.

 Model S-15-5 S-15-12 S-15-24
 DC output voltage 5V 12V 24V
 Output ovltage range(Note:2) +-2% +-1% +-1%
 Rated output current 3A 1.3A 0.7A
 Output current range 0-3A 0-1.3A 0-0.7A
 Wave and noise(Note:3) 50mVp-p 50mVp-p 100mVp-p
 Intel stability(Note:4) +-0.5% +-0.5% +-0.5%
 Load stability(Note:5) +-1% +-0.5% +-0.5%
 DC Output power 15W 15.6W 16.8W
 Efficiency 65% 68% 72%
 Adjustable range for DC voltage +10%,-5% +-10% +-10%
 AC input voltage range 85-132VAC/170-264VAC selected by switch 47-63Hz,240-370VDC
 Input current 0.5A/115V 0.25A/230V
 AC inrush current Cole-start current 15A/115V 30A/230V
 Leakage current <0.5mA/240VAC
 Over load protection 105%-150%M Type:pulsing hiccup shutdown Reset:auto recovery
 Over-voltage protection 115%-135%
 High-temperature protection ............
 Temperature coefficient +-0.02% degrees(0-50 degrees)
 Setup,rise,hold up time 200ms,100ms,30ms
 Vibration 10-500Hz,2G 10min,/1cycle,period for 60min,each axes 
 Withstand voltage

Input and output internal:1.5KvAC,Input and enclosure:1.5KvAC,Output and enclosure:0.5KvAC

 Isolation resistance Input and output internal,Input and enclosure,Output and enclosure:500VDC/100MOhm
 Working temperature and humidity -10 degrees-+60 degrees(Refer to output derating curve),20%-90%RH
 Stoerall dimension -20 degrees-+85 degrees,10%-95%RH
 Overall dimension 99*97*35mm  120*46*32mm
 Weight 0.3kgs
 Safety standards Meet UL 1012 requirement (Not apply for the mark)
 EMC standards Meet FCC PART 15J Conduction class B
 Note: 1.The testing condition for the paramenter above is:230VAC input,rated load,25 degrees 70%RH,Temperature.
2.Error:Include the setting error,line stability and load stability.(Note:5)
3.Wave test:adoping A12 doubl wire for 20MHz,nd 0.1UF&47UF capacitor short-circuit for interrupting.
4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.
5.Load stavility test:The load is from 0% to 100%.

SEND US A MESSAGE

If you are interested in our products, please don’t be hesitated to contact us. Please send mail to info@mingch.com.cn, or leave your message at the following form. We will contact you within 24 hours. Thank you for your enquiry.